Studying the Rheological Properties of Non-Newtonian Fluids Under the Addition of Different Chemical Additives
DOI:
https://doi.org/10.29194/NJES.23010068Keywords:
Non-Newtonian Fluids, Rheological Properties, Bingham Plastic ModelAbstract
This research study the rheological properties ( plastic viscosity, yield point and apparent viscosity) of non-Newtonian fluids under the addition of different chemical additives with different concentrations, such as (xanthan gum (xc-polymer) , carboxy methyl cellulose ( high and low viscosity ) ,polyacrylamide, polyvinyl alcohol, starch, quebracho, chrome lignosulfonate, and sodium chloride (NaCl). Fann viscometer model 800 with 8-speeds was used to measure the rheological properties of these samples, that have already been prepared. All samples were subjected to Bingham plastic model. It was concluded that the plastic viscosity, yield point and apparent viscosity should be increased with increasing the concentrations of (xanthan gum (xc-polymer) , carboxy methyl cellulose ( high and low viscosity ) ,polyacrylamide, polyvinyl alcohol, starch and sodium chloride (NaCl), while the opposite is true for quebracho, chrome lignosulfonate.
Downloads
Downloads
Published
Issue
Section
License
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.