Studying the Rheological Properties of Non-Newtonian Fluids Under the Addition of Different Chemical Additives

Authors

  • Douaa Hussein Ali College of Engineering, Al-Nahrain University
  • Muhannad A.R. Mohammed College of Engineering, Al-Nahrain University

DOI:

https://doi.org/10.29194/NJES.23010068

Keywords:

Non-Newtonian Fluids, Rheological Properties, Bingham Plastic Model

Abstract

This research study the rheological properties ( plastic viscosity, yield point and apparent viscosity) of non-Newtonian fluids under the addition of different chemical additives with different concentrations, such as (xanthan gum (xc-polymer) , carboxy methyl cellulose ( high and low viscosity ) ,polyacrylamide, polyvinyl alcohol, starch, quebracho, chrome lignosulfonate, and sodium chloride (NaCl). Fann viscometer model 800 with 8-speeds was used to measure the rheological properties of these samples, that have already been prepared. All samples were subjected to Bingham plastic model. It was concluded that the plastic viscosity, yield point and apparent viscosity should be increased with increasing the concentrations of (xanthan gum (xc-polymer) , carboxy methyl cellulose ( high and low viscosity ) ,polyacrylamide, polyvinyl alcohol, starch and sodium chloride (NaCl), while the opposite is true for quebracho, chrome lignosulfonate.

Downloads

Download data is not yet available.

Downloads

Published

20-03-2020

How to Cite

[1]
D. H. Ali and M. A. Mohammed, “Studying the Rheological Properties of Non-Newtonian Fluids Under the Addition of Different Chemical Additives”, NJES, vol. 23, no. 1, pp. 68–80, Mar. 2020, doi: 10.29194/NJES.23010068.

Similar Articles

1-10 of 277

You may also start an advanced similarity search for this article.