Adsorption of Nickel Ions From Aqueaus Solution Using Natural Clay
DOI:
https://doi.org/10.29194/NJES21020223Keywords:
Adsorption, Nickel (II), Iraqi bentonite clay, KineticsAbstract
The adsorption characteristics of Nickel (II) onto Iraqi Bentonite clay from aqueous solution have been investigated with respect to changes in pH of solution, adsorbent dosage, contact time and temperature of the solution. The maximum removal efficiency of Nickel (II) ions is 96% at pH=6.5 and exposure to 100 g/L adsorbent. For the adsorption of Nickel (II) ions, the Freundlich isotherm model fitted the equilibrium data better than the Langmuir isotherm model. Experimental data are also evaluated in terms of kinetic characteristics of adsorption and it was found that the adsorption process for Ni+2 ions follows well pseudo-second-order kinetics. Thermodynamic functions, the change of free energy (?G°), enthalpy (?H°) and entropy (?S°) of adsorption are also calculated for Nickel (II) ions. The results show that the adsorption of the Nickel (II) ions on Iraqi Bentonite is feasible and exothermic at (20-50) °C.
Downloads
Downloads
Published
Issue
Section
License
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.