Effect of Heat Treatment on The Hydroformability of CuZn 35 Sheet Metal

Authors

  • Ali H. Alhelli Mechanical Eng. Dep. Al-Nahrain University
  • Abdul Hakeem Amer S.Salim Mechanical Eng. Dep. Al-Nahrain University

Abstract

Sheet metal forming becomes a research topic for its widely using in the industrial field, these researches seeking for a better specifications of the products with low cost of production processes using available raw materials. In this work the sheet metal used is CuZn35 1mm thick. This sheet metal formed by a process named hydroforming process using a square shaped die to form the sheet metal according to its cavity by the pressure of the hydraulic which must be in direct contact with the surface of the sheet metal. Tests had been made for this sheet metal and for the final product for the as received specimen and for the heat treated one which shows the improvement of the formability of this sheet metal.

Downloads

Download data is not yet available.

Downloads

Published

11-06-2017

Issue

Vol. 20 No. 3 (2017): Al-Nahrain Journal for Engineering Sciences

Section

Articles

License

The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.

How to Cite

[1]
A. H. Alhelli and A. H. A. S.Salim, “Effect of Heat Treatment on The Hydroformability of CuZn 35 Sheet Metal”, NJES, vol. 20, no. 3, pp. 505–510, Jun. 2017, Accessed: Nov. 24, 2024. [Online]. Available: https://nahje.com/index.php/main/article/view/239