Design and Manufacture of a High Efficiency Plate Heat Exchanger

Baraa B. Mohammed; Amar S. Abdul-Zahra; Ahmed A. M. Saleh

doi:10.29194/NJES.23040345

Design and Manufacture of a High Efficiency Plate Heat Exchanger

Authors

Baraa B. Mohammed Mechanical Engineering Department, University of Technology, Baghdad-Iraq.
Amar S. Abdul-Zahra Mechanical Engineering Department, University of Technology, Baghdad-Iraq.
Ahmed A. M. Saleh Mechanical Engineering Department, University of Technology, Baghdad-Iraq.

DOI:

https://doi.org/10.29194/NJES.23040345

Keywords:

Plate Heat Exchanger, Heat Recovery, Preheating, Precooling

Downloads

Download data is not yet available.

Downloads

Published

22-12-2020

Issue

Vol. 23 No. 4 (2020): Al-Nahrain Journal for Engineering Sciences

Section

Articles

License

The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.

How to Cite

[1]

B. B. Mohammed, A. S. Abdul-Zahra, and A. A. M. Saleh, “Design and Manufacture of a High Efficiency Plate Heat Exchanger”, NJES, vol. 23, no. 4, pp. 345–351, Dec. 2020, doi: 10.29194/NJES.23040345.