Study of Adhesive Wear of Epoxy Reinforced with glass fibers Composite Material

Authors

  • Rula Abdul Khider Abbas Applied Sciences /Material Sciences
  • Muzher Ali Sahib Electromechanical Engineering Technology University
  • Balkees Mohammed Dyaa Applied Sciences /Material Sciences

Keywords:

Wear of Epoxy, glass fibers

Abstract

The dry wear, compression resistance and hardness of a material that consists of Epoxy reinforced with (25%) ratio of

Glass fiber have been Studied.

A comparison is made between the properties of the composite at temperature ( 20 2 0C) with those of un reinforced

Epoxy to find out the effect of reinforcement on the composite. Volume fraction for specimen was (25%) and the

reinforcement material were continuous fiber oriented in woven raven.

The measurement of wear rate shows a decreases with reinforcement. Compression resistance and Hardness increase

with reinforcement.

The results of compaction have clearly shown that wear rate and wear rate volume increasing normal applied load,

sliding distance, time sliding and hardness of disc. The results also show that wear rate and wear rate volume for all

materials increases with normal applied load and running time. The results also show that wear rate and wear rate

volume decrease with increasing the applied with increasing the hardness of disc and sliding distance.

The topography of some physically tested was studied using optical microscopy

Downloads

Download data is not yet available.

Downloads

Published

20-03-2010

How to Cite

[1]
R. A. K. Abbas, M. A. Sahib, and B. M. Dyaa, “Study of Adhesive Wear of Epoxy Reinforced with glass fibers Composite Material”, NJES, vol. 13, no. 1, pp. 116–130, Mar. 2010, Accessed: Nov. 09, 2024. [Online]. Available: https://nahje.com/index.php/main/article/view/585

Similar Articles

1-10 of 65

You may also start an advanced similarity search for this article.