Corrosion of Aluminum Alloy in Chloride Medium Containing Pseudomonas aerginosa Bacteria.

Authors

  • Zuheir T. Khulief Al-Tai Babylon University, College of Material Engineering, Metallurgy

Keywords:

Microbiologically induced corrosion, Chloride medium, Bacteria, Bioflim, Corrosion, Aluminum alloy, Microbiologically analyses

Abstract

This paper reports the microbiologically induced corrosion (MIC) behavior of aluminum alloy in the chloride medium containing Pseudomonas aerinosa bacteria. MIC studies were performed at room temperature for 15 and 30 day in 2% NaCl electrolyte. System I consisted of 2% NaCl by weight (i.e.,uninoculated) as the control system; system II consists of system I inoculated with Pseudomonas aerinosa bacteria. Corrosion analyses by (Tafel polarization resistance and weight loss method); surface analysis (i.e Microstracture examination; Roughness test and X-Ray diffraction analysis) and microbiologically analyses (i.e Sampling; biofilm formation; isolation and identification) were used in this study. The result of Tafel polarization resistance and weight loss method showed that the bacteria caused increasing of corrosion current and increasing the rate of corrosion compared with system I. Surface analysis showed that the bacteria caused pitting corrosion and increasing the surface roughness compared with system I. The results of microbiologically analyses showed non-uniform and heterogeneous biofilm form on the surface of aluminum alloy after immersion in system II and show the role of Pseudomonas aerinosa bacteria in accelerating pitting corrosion of aluminum alloy in the chloride medium.

Downloads

Download data is not yet available.

Downloads

Published

15-06-2017

How to Cite

Corrosion of Aluminum Alloy in Chloride Medium Containing Pseudomonas aerginosa Bacteria. (2017). Al-Nahrain Journal for Engineering Sciences, 16(2), 192-207. https://nahje.com/index.php/main/article/view/288

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>