Force Convection Heat transfer from a Different Cross Section Cylinder Embedded in Porous Media

Authors

  • Suhad A. Rasheed Mech. Eng. Dept. University of Technology
  • Jasim M. Abood Mech. Eng. Dept. University of Technology

Keywords:

Forced convection, porous media, Heater model

Abstract

This research presents an experimental study of forced convection heat transfer for laminar steady flows in a duct filled with saturated porous media glass balls.The heater model consists of a circular cylinder , square cylinder and triangular cylinder .The experimental work was studied the effect of changing heater section on forced convection heat transfer with selected values of heat supply ( 2455W/m2 ).The experiments were carried out for Reynolds number ( 1094 ?

Downloads

Download data is not yet available.

Downloads

Published

14-06-2017

Issue

Vol. 20 No. 3 (2017): Al-Nahrain Journal for Engineering Sciences

Section

Articles

License

The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.

How to Cite

[1]
S. A. Rasheed and J. M. Abood, “Force Convection Heat transfer from a Different Cross Section Cylinder Embedded in Porous Media”, NJES, vol. 20, no. 3, pp. 727–736, Jun. 2017, Accessed: Nov. 22, 2024. [Online]. Available: https://nahje.com/index.php/main/article/view/276

Similar Articles

41-50 of 208

You may also start an advanced similarity search for this article.