The Effect of Flow Velocity on Corrosion and Corrosion Mitigation of Carbon Steel in Wide Range of Sulfuric Acid Concentration
DOI:
https://doi.org/10.29194/NJES.27010091Keywords:
Corrosion Rate, Carbon Steel, Sulfuric Acid, Flow Velocity, InhibitorAbstract
The impact of flow velocity (0-900 rpm) on the corrosion rate of carbon steel in a wide range of sulfuric acid concentrations (0-90% in H2O) at 30 °C and 1 h was studied and discussed. In addition, the efficiency of corrosion inhibitor (dimethyl disulfide, DMD) was evaluated in hardest corrosion conditions for the range of velocity investigated. The results revealed that increasing the flow velocity of H2SO4 solution, increases the corrosion rate depending on the acid concentration. When the flow velocity is increased of H2SO4 solution, the corrosion potential was shifted to more negative. The DMD inhibitors showed significant inhibition efficiency at high velocities, where the highest percentage of inhibitor efficiency reached 98% at 900 rpm.
Downloads
References
Q. Li et al., “Long-term corrosion monitoring of carbon steels and environmental correlation analysis via the random forest method,” npj Mater. Degrad., vol. 6, no. 1, pp. 1–9, 2022.
B. O. Hasan and S. A. Sadek, “The effect of temperature and hydrodynamics on carbon steel corrosion and its inhibition in oxygenated acid-salt solution,” J. Ind. Eng. Chem., vol. 20, no. 1, pp. 297–307, 2014, doi: 10.1016/j.jiec.2013.03.034.
B. Poulson, “Electrochemical measurements in flowing solutions,” Corros. Sci., vol. 23, no. 4, pp. 391–430, 1983.
T. L. Muller, “Sulfuric acid and sulfur trioxide,” Kirk‐Othmer Encycl. Chem. Technol., 2000.
Z. Panossian, N. L. de Almeida, R. M. F. de Sousa, G. de S. Pimenta, and L. B. S. Marques, “Corrosion of carbon steel pipes and tanks by concentrated sulfuric acid: A review,” Corros. Sci., vol. 58, pp. 1–11, 2012, doi: 10.1016/j.corsci.2012.01.025.
N. D. Greene, C. R. Bishop, and M. Stern, “Corrosion and electrochemical behavior of chromium‐noble metal alloys,” J. Electrochem. Soc., vol. 108, no. 9, p. 836, 1961.
T. H. Abood, “The influence of various parameters on pitting corrosion of 316L and 202 stainless steel,” Dep. Chem. Eng. Univ. Technol. Univ. Technol., 2008.
S. Sharifi-Asl, A. Liang, D. Cooke, D. R. Chapman, B. Chaloner-Gill, and A. E. Kuperman, “High-temperature sulfidic corrosion of carbon steel in model oil/sulfur compound blends,” in CORROSION 2017, 2017.
A. Y. Musa, A. A. H. Kadhum, A. B. Mohamad, M. S. Takriff, S. K. Kamarudin, and A. R. Daud, “Determination of mild steel corrosion rate under turbulent flow in highly acidic solution,” J. Appl. Sci., vol. 11, no. 13, pp. 2464–2466, 2011.
A. C. Ciubotariu, L. Benea, and P. L. Bonora, “Corrosion studies of carbon steel X60 by electrochemical methods,” J. Optoelectron. Adv. Mater., vol. 12, no. 5, 2010.
S. S. Hussein, N. A. AI, and B. O. Hasan, “Corrosion of carbon steel in flowing Sulfuric acid,” Int. J. Curr. Eng. Technol., vol. 6, no. 1, 2016.
Z. A. FOROULIS, “The influence of velocity and dissolved oxygen on the initial corrosion behavior of iron in high purity water,” Corrosion, vol. 35, no. 8, pp. 340–344, 1979.
P. V Scheers, “The effects fo flow velocity and pH on the corrosion rate of mild steel in a synthetic minewater,” J. South. African Inst. Min. Metall., vol. 92, no. 10, pp. 275–281, 1992.
Q. J. M. Slaimana and B. O. Hasan, “Study on corrosion rate of carbon steel pipe under turbulent flow conditions,” Can. J. Chem. Eng., vol. 88, no. 6, pp. 1114–1120, 2010.
A. Fiala, W. Boukhedena, S. E. Lemallem, H. Brahim Ladouani, and H. Allal, “Inhibition of Carbon Steel Corrosion in HCl and H2SO4 Solutions by Ethyl 2-Cyano-2-(1,3-dithian-2-ylidene) Acetate,” J. Bio- Tribo-Corrosion, vol. 5, no. 2, pp. 20–22, 2019, doi: 10.1007/s40735-019-0237-5.
Suwarno and M. Nashir, “Effect of sulfuric acid concentration on the corrosion rate of astm a213-t12 steel,” in Key Engineering Materials, 2020, vol. 867 KEM. doi: 10.4028/www.scientific.net/KEM.867.213.
S. H. Alwash, V. Ashworth, M. Shirkhanzadeh, and G. E. Thompson, “An investigation of the reduction of oxygen at a rotating disc electrode with heat transfer facilities,” Corros. Sci., vol. 27, no. 12, pp. 1301–1311, 1987.
H. M. Turkee, “Investigation of the Performance of Some Corrosion Inhibitors in Aerated Acid Solutions.” M. Sc. Thesis Dept. of Chem. Eng., University of AL-Nahrain, Baghdad, 2009.
B. O. Hasan and S. A. Sadek, “Effect of Different Operating Conditions on the Corrosion of Carbon Steel in Oxygenated Sodium Sulphate Solution,” J. Pet. Res. Stud., vol. 4, no. 3, pp. 62–89, 2013, doi: 10.52716/jprs.v4i3.118.
S. S. Hussein, B. O. Hasan, and N. A. Al-Haboubi, “Galvanic Corrosion of Copper/Nickel-Chrome Alloy in an Agitated Sulfuric Acid Solution,” Al-Nahrain J. Eng. Sci., vol. 21, no. 1, pp. 133–140, 2018.
Z. Panossian, N. L. de Almeida, R. M. F. de Sousa, G. de Souza Pimenta, and L. B. S. Marques, “Corrosion of carbon steel pipes and tanks by concentrated sulfuric acid: a review,” Corros. Sci., vol. 58, pp. 1–11, 2012.
B. O. Hassan, H. D. A. Kader, and M. F. Abdul-Jabbar, “Experimental study on carbon steel corrosion and its inhibition using sodium benzoate under different operating conditions,” Iraqi J. Chem. Pet. Eng., vol. 12, no. 3, pp. 11–24, 2011.
B. O. Hasan and S. A. Sadek, “The effect of temperature and hydrodynamics on carbon steel corrosion and its inhibition in oxygenated acid–salt solution,” J. Ind. Eng. Chem., vol. 20, no. 1, pp. 297–307, 2014.
K. N. Mohana, “Corrosion inhibitors behavior studies on mild steel in industrial water and acid medium”.
A. M. Badiea and K. N. Mohana, “Effect of temperature and fluid velocity on corrosion mechanism of low carbon steel in presence of 2-hydrazino-4, 7-dimethylbenzothiazole in industrial water medium,” Corros. Sci., vol. 51, no. 9, pp. 2231–2241, 2009.
R. Lopes-Sesenes, G. F. Dominguez-Patiño, J. G. Gonzalez-Rodriguez, and J. Uruchurtu-Chavarin, “Effect of flowing conditions on the corrosion inhibition of carbon steel by extract of buddleia perfoliata,” Int. J. Electrochem. Sci, vol. 8, pp. 477–489, 2013.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Saher Alzuraiji, Maha H. Kazem, Basim O. Hasan, Hussein T. Znad
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
