Experimental Study of Mechanical Properties of Unidirectional Woven Carbon Fiber and Fiber Glass - Epoxy Composites
DOI:
https://doi.org/10.29194/NJES.26010007Keywords:
Unidirectional Woven Carbon, Epoxy, Fiber glass, Composite materialAbstract
In this study, the mechanical properties of an epoxy, unidirectional woven carbon and fiberglass composite were investigated experimentally. ASTM used for preparing the composite specimen. Different ranges of mixing ratios of woven carbon and fiberglass with epoxy are studied. Tensile, impact and bending test are carried out to investigate the mechanical properties for produced new composites. After testing the mechanical properties of the specimens, it is noted that adding of unidirectional woven carbon layers will leads to strengthens the samples. The mechanical properties of woven carbon composite are far superior to those of woven carbon composite with fiberglass.
Downloads
References
M. N. Rejab, "Finite Element Analysis of Mechanical Properties for 2D Woven Kenaf Composite," Universiti Tun Hussein Onn Malaysia, 2013.
https://core.ac.uk/download/pdf/19451567.pdf
S. Ek?? and K. Genel, "Comparison of mechanical properties of unidirectional and woven carbon, glass and aramid fiber reinforced epoxy composites," composites, vol. 132, no. 3, pp. 879-882, 2017.
http://przyrbwn.icm.edu.pl/APP/PDF/132/app132z3-IIp021.pdf
R. Thirumalai, R. Prakash, R. Ragunath, and K. Senthilkumar, "Experimental investigation of mechanical properties of epoxy based composites," Materials Research Express, vol. 6, no. 7, p. 075309, 2019.
https://iopscience.iop.org/article/10.1088/2053-1591/ab10f7/meta
P. R. Thakre et al., "Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber—epoxy composites," Journal of Composite Materials, vol. 45, no. 10, pp. 1091-1107, 2011.
https://doi.org/10.1177/0021998310389088
S. H. Yoo et al., "Facile method to fabricate carbon fibers from textile-grade polyacrylonitrile fibers based on electron-beam irradiation and its effect on the subsequent thermal stabilization process," Carbon, vol. 118, pp. 106-113, 2017.
https://doi.org/10.1016/j.carbon.2017.03.039
C. He et al., "A hierarchical multiscale model for the elastic-plastic damage behavior of 3D braided composites at high temperature," Composites Science and Technology, vol. 196, p. 108230, 2020.
https://doi.org/10.1016/j.compscitech.2020.108230
J. P. Davim, P. Reis, and C. C. Antonio, "Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up," Composites Science and Technology, vol. 64, no. 2, pp. 289-297, 2004.
https://doi.org/10.1016/S0266-3538(03)00253-7
S. Singh and P. SK Jain, "An experimental and numerical investigation of mechanical properties of glass fiber reinforced epoxy composites," Advanced Materials Letters, vol. 4, no. 7, pp. 567-572, 2013.
http://dx.doi.org/10.5185/amlett.2012.11475
M. Bhargav and V. S. Babu, "Experimental investigation of fiber orientation effect on mechanical and erosive wear performance of TiO2 filled woven jute fiber based epoxy composites," Materials Today: Proceedings, vol. 44, pp. 2617-2622, 2021.
https://doi.org/10.1016/j.matpr.2020.12.660
C. Wang et al., "Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres," Polymer Testing, vol. 101, p. 107314, 2021.
https://doi.org/10.1016/j.polymertesting.2021.107314
G. Zhou, X. Wang, C. Li, and J. Deng, "Experimental investigation on mechanical properties of unidirectional and woven fabric glass/epoxy composites under off-axis tensile loading," Polymer Testing, vol. 58, pp. 142-152, 2017.
https://doi.org/10.1016/j.polymertesting.2016.12.023
T. Jagannatha and G. Harish, "Mechanical properties of carbon/glass fiber reinforced epoxy hybrid polymer composites," International Journal of Mechanical Engineering and Robotics Research, vol. 4, no. 2, pp. 131-137, 2015.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Naznaz Jalal Awla, Younis Khalid Khdir
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors retain the copyright of their manuscript by submitting the work to this journal, and all open access articles are distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC 4.0), which permits use for any non-commercial purpose, distribution, and reproduction in any medium, provided that the original work is properly cited.
How to Cite
