Experimental Investigation of a Temperature Change inside Pneumatic Cylinder Chambers

Authors

  • Jafar M. Hassan Mechanical Eng. Dep., University of Technology
  • Dheya Ghanim Mechanical Eng. Dep., University of Technology
  • Noor B. Hamandy Mechanical Eng. Dep., University of Technology

Keywords:

Pneumatic system, Pneumatic cylinder charging and discharging, Servo pneumatic system, Temperature and pressure measurement

Abstract

The investigation of the existence of a tempera-ture change with pressure inside the pneumatic cylinder chambers during the charging and dis-charging strokes in the pneumatic cylinder is ex-perimentally demonstrated. Three different varia-bles (pressure, piston displacement and tempera-ture) were measured in this work while operating with a servo pneumatic system and a discussion of the relationship between these variables was pre-sented. The cylinder used has a piston diameter of (0.05m), piston rod diameter (0.02m) and a stroke length of (0.2m). The results show a temperature rise of 23 K above atmospheric temperature at chamber (1) while air compressing and a tempera-ture drop of 17 K below atmospheric temperature at chamber (2) while air expansion and measures other temperature changes also.

Downloads

Download data is not yet available.

Downloads

Published

01-01-2017

How to Cite

[1]
J. M. Hassan, D. Ghanim, and N. B. Hamandy, “Experimental Investigation of a Temperature Change inside Pneumatic Cylinder Chambers”, NJES, vol. 20, no. 1, pp. 1–4, Jan. 2017, Accessed: Nov. 23, 2024. [Online]. Available: https://nahje.com/index.php/main/article/view/65

Similar Articles

51-60 of 343

You may also start an advanced similarity search for this article.