A Portable Non-Invasive System for Detecting Blood Glucose Levels Using a Laser-Based Sensor

Authors

  • Fatima Ibrahim Department of Biomedical Engineering, Al-Nahrain University, Baghdad, Iraq.
  • Zaid Mustafa Department of Biomedical Engineering, Al-Nahrain University, Baghdad, Iraq.
  • Ahmed Lateef Department of Biomedical Engineering, Al-Nahrain University, Baghdad, Iraq.

DOI:

https://doi.org/10.29194/NJES.27010019

Keywords:

Blood glucose, Invasive Technique, Non-invasive Technique, Red laser

Abstract

Diabetes is a long-term medical condition that impacts the way your body converts food into energy, it has the potential to lead to several severe health complications, such as heart disease, stroke, vision impairment, kidney issues, and nerve damage. Nevertheless, individuals with diabetes can lead extended and healthy lives with effective management. The goal of diabetes treatment is to keep your blood sugar levels within a healthy range. So Glucose measurement is an important part of diabetes management. It allows people with diabetes to track their blood sugar levels and make adjustments to their diet and medication as needed. Morning fasting blood glucose typically falls within the range of (70 mg/dL) to (110 mg/dL), while after a meal, blood glucose levels should ideally be below (140 mg/dL). In this proposed work an Arduino-based noninvasive glucose measurement device is proposed. Non-invasive glucose measurement devices do not require the user to prick their finger to draw blood. A Red Laser (RL) technique, is employed, this method surpasses the other invasive approach and non-invasive methods in terms of superiority. Since invasive techniques can be painful and expensive. This paper describes a new way to measure blood sugar levels without having to prick your finger. The method uses a red laser to shine light through the skin and measure how much the light is bent. The amount of bending tells the device how much sugar is in the blood. Numerous tests and experimental outcomes have been produced to demonstrate the exceptional accuracy of the proposed method.

Downloads

Download data is not yet available.

References

C. M. C. M. Couto, A. N. Araújo, M. C. B. S. M. Montenegro, J. Rohwedder, I. Raimundo, and C. Pasquini, “Application of amperometric sol-gel biosensor to flow injection determination of glucose,” Talanta, vol. 56, no. 6, pp. 997–1003, 2002, doi: 10.1016/S0039-9140(01)00587-2.

Q. Yang, P. Atanasov, and E. Wilkins, “Development of needle-type glucose sensor with high selectivity,” Sensors Actuators, B Chem., vol. 46 B46, no. 3, pp. 249–256, 1998, doi: 10.1016/s0925-4005(98)00126-9.

H. Ukeda, Y. Fujita, M. Ohira, and M. Sawamura, “Immobilized Enzyme-Based Microtiter Plate Assay for Glucose in Foods,” J. Agric. Food Chem., vol. 44, no. 12, pp. 3858–3863, 1996, doi: 10.1021/jf960261l.

M. Lepore et al., “Glucose concentration determination by means of fluorescence emission spectra of soluble and insoluble glucose oxidase: Some useful indications for optical fibre-based sensors,” J. Mol. Catal. B Enzym., vol. 31, no. 4–6, pp. 151–158, 2004, doi: 10.1016/j.molcatb.2004.07.008.

X. J. Wu and M. M. F. Choi, “An optical glucose biosensor based on entrapped-glucose oxidase in silicate xerogel hybridised with hydroxyethyl carboxymethyl cellulose,” Anal. Chim. Acta, vol. 514, no. 2, pp. 219–226, 2004, doi: 10.1016/j.aca.2004.03.052.

O. S. Khalil, “Spectroscopic and clinical aspects of noninvasive glucose measurements,” Clin. Chem., vol. 45, no. 2, pp. 165–177, 1999, doi: 10.1093/clinchem/45.2.165.

L. N. Li, Q. B. Li, and G. J. Zhang, “A weak signal extraction method for human blood glucose noninvasive measurement using near infrared spectroscopy,” J. Infrared, Millimeter, Terahertz Waves, vol. 30, no. 11, pp. 1191–1204, 2009, doi: 10.1007/s10762-009-9544-0.

M. A. Arnold, L. Liu, and J. T. Olesberg, “Selectivity assessment of noninvasive glucose measurements based on analysis of multivariate calibration vectors,” J. Diabetes Sci. Technol., vol. 1, no. 4, pp. 454–462, 2007, doi: 10.1177/193229680700100402.

C. Fischbacher, K. U. Jagemann, K. Danzer, U. A. Müller, L. Papenkordt, and J. Schüler, “Enhancing calibration models for non-invasive near-infrared spectroscopical blood glucose determination,” Fresenius. J. Anal. Chem., vol. 359, no. 1, pp. 78–82, 1997, doi: 10.1007/s002160050539.

A. W. S. Tarrant, “Optical measurements,” Instrum. Ref. B. Third Ed., vol. 10, pp. 492–516, 2003, doi: 10.1016/B978-075067123-1/50025-9.

K. V. Larin, M. S. Eledrisi, M. Motamedi, and R. O. Esenaliev, “Noninvasive blood glucose monitoring with optical coherence tomography: A pilot study in human subjects,” Diabetes Care, vol. 25, no. 12, pp. 2263–2267, 2002, doi: 10.2337/diacare.25.12.2263.

C. D. Malchoff, K. Shoukri, J. I. Landau, and J. M. Buchert, “A novel noninvasive blood glucose monitor,” Diabetes Care, vol. 25, no. 12, pp. 2268–2275, 2002, doi: 10.2337/diacare.25.12.2268.

S. F. Malin, T. L. Ruchti, T. B. Blank, S. N. Thennadil, and S. L. Monfre, “Noninvasive prediction of glucose by near-infrared diffuse reflectance spectroscopy,” Clin. Chem., vol. 45, no. 9, pp. 1651–1658, 1999, doi: 10.1093/clinchem/45.9.1651.

J. J. Burmeister and M. A. Arnold, “Evaluation of measurement sites for noninvasive blood glucose sensing with near-infrared transmission spectroscopy,” Clin. Chem., vol. 45, no. 9, pp. 1621–1627, 1999, doi: 10.1093/clinchem/45.9.1621.

H. Ali, F. Bensaali, and F. Jaber, “Novel Approach to Non-Invasive Blood Glucose Monitoring Based on Transmittance and Refraction of Visible Laser Light,” IEEE Access, vol. 5, pp. 9163–9174, 2017, doi: 10.1109/ACCESS.2017.2707384.

S. Haxha and J. Jhoja, “Optical Based Noninvasive Glucose Monitoring Sensor Prototype,” IEEE Photonics J., vol. 8, no. 6, pp. 1–11, 2016, doi: 10.1109/JPHOT.2016.2616491.

W. Zhang, Y. Du, and M. L. Wang, “Noninvasive glucose monitoring using saliva nano-biosensor,” Sens. Bio-Sensing Res., vol. 4, pp. 23–29, 2015, doi: 10.1016/j.sbsr.2015.02.002.

M. N. Mohd Zain, A. Musa, M. H. Hisham, A. R. Laili, and Z. M. Yusof, “Photon counting polarimetry measurement towards non-invasive biomedical glucose monitoring,” Proc. ICP 2014 - 5th Int. Conf. Photonics 2014, no. September, pp. 156–158, 2015, doi: 10.1109/ICP.2014.7002364.

A. S. A. El-hamid, A. E. Fetohi, R. S. Amin, and R. M. A. Hameed, “Design of Digital Blood Glucose Meter Based on Arduino UNO,” IJournals All Rights Reserv., vol. 3, no. 8, p. 8, 2015, [Online]. Available: www.ijournals.in

P. Narkhede, S. Dhalwar, and B. Karthikeyan, “NIR based non-invasive blood glucose measurement,” Indian J. Sci. Technol., vol. 9, no. 41, 2016, doi: 10.17485/ijst/2016/v9i41/98996.

B. Lakshmi Priya, S. Jayalakshmy, R. Bhuvaneshwar, and J. Kishore Kumar, “Non - Invasive Blood Glucose Monitoring based on Visible LASER Light,” Proc. 3rd Int. Conf. Commun. Electron. Syst. ICCES 2018, no. October 2018, pp. 938–941, 2018, doi: 10.1109/CESYS.2018.8724048.

T. W. Gamessa and D. Suman, “Non-invasive blood glucose monitoring using visible laser light,” Res. J. Pharm. Technol., vol. 12, no. 2, pp. 831–840, 2019, doi: 10.5958/0974-360X.2019.00144.6.

V. Apar and D. R. M. Autee, “Development of Portable Device for Measurement of Blood Glucose, Temperature and Pulse-Oximeter using Arduino,” Int. Res. J. Eng. Technol., vol. 85, pp. 85–89, 2008, [Online]. Available: www.irjet.net

M. J. Therese*, P. Dharanyadevi, Devi, and C. Kalaiarasy, “Detection of Blood Glucose Level in Humans using Non-Invasive Method-RL BGM,” Int. J. Recent Technol. Eng., vol. 9, no. 1, pp. 304–309, 2020, doi: 10.35940/ijrte.f1209.059120.

R. Ekawita, A. A. Nasution, E. Yuliza, N. Suardi, and S. Suwarsono, “Development of Non-Invasive Blood Glucose Level Monitoring System using Phone as a Patient Data Storage,” J. Penelit. Fis. dan Apl., vol. 10, no. 2, p. 103, 2020, doi: 10.26740/jpfa.v10n2.p103-113.

A. M. Tashtoush, “Non-invasive blood glucose measurement using laser technology (NIBGM),” Int. J. Comput. Digit. Syst., vol. 10, no. 1, pp. 297–307, 2021, doi: 10.12785/ijcds/100130.

S. R. Z. Hamdani, M. Tahir, F. Akram, M. S. Orakzai, S. Amin, and Z. A. Khan, “Designing A Non-Invasive Testing Device for Infant Diabetes using Saliva,” Pakistan J. Eng. Technol., vol. 5, no. 2, pp. 193–197, 2022, doi: 10.51846/vol5iss2pp193-197.

G. S. Monisha, K. Kajendran, G. Nirmala, and D. R. Thirupurasundari, “A Smart Novel Approach of Blood Glucose Monitoring System using Arduino Board,” Int. J. Intell. Syst. Appl. Eng., vol. 11, no. 2, pp. 495–502, 2023.

N. Spegazzini et al., “Spectroscopic approach for dynamic bioanalyte tracking with minimal concentration information,” Sci. Rep., vol. 4, pp. 1–7, 2014, doi: 10.1038/srep07013.

Downloads

Published

23-06-2024

How to Cite

[1]
F. Ibrahim, Z. Mustafa, and A. Lateef, “A Portable Non-Invasive System for Detecting Blood Glucose Levels Using a Laser-Based Sensor”, NJES, vol. 27, no. 1, pp. 19–24, Jun. 2024, doi: 10.29194/NJES.27010019.

Similar Articles

71-80 of 178

You may also start an advanced similarity search for this article.