×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerIn this paper the ability of fabricating laminate composites by manual layup was discussed. Heating method was used to manufacture the composites; heat was applied to approximately 12 hours with specific heat temperature. There were four types of laminate composites fabricated and studied in this research, containing Aluminum alloy 6061 as the common element in all types, two types of fibers; woven Carbon fiber with two different orientations: ±45°, ±60°, random fiberglass and with two types of resin; epoxy resin and polyester resin. Different types of composites were made to determine the effect of CNC milling machine to the measured surface roughness and for specified parameters. The weight fraction ratio of the fibers is 37%, polymer is 34% and 29% for Aluminum. The parameters selected are spindle speed, feed rate and depth of cut. The L9 Taguchi orthogonal arrays, signal to noise (S/N) ratio and analysis of variance (ANOVA) are selected to determine the effect of these parameters; it was analyzed by MINITAB 17 program. The results showed that the parameter were significant more to the epoxy resin specimens than polyester resin specimens. The optimal milling parameters for good surface finish for Aluminum – Carbon fiber composite are at 3000RPM, 1200mm/min, 1.2mm, and for Aluminum – Fiberglass composite are 5000RPM, 1800 mm/min, 2.0mm.
Concrete is considered the most important and widely used building material in the world of construction and building due to its durability, high efficiency in shaping, and relatively reasonable cost. The main component of concrete is cement, and one of the most important problems related to cement is the environmental problems associated with cement manufacturing, as the cement manufacturing process releases a large amount of carbon dioxide. Despite the essential role of concrete in construction, we cannot ignore its environmental impact. Some claim that exploring alternative materials or innovative building techniques would reduce the carbon footprint and enhance sustainability in the industry. Partial cement replacement with pozzolanic materials like zeolite is a key technique to reduce carbon dioxide emissions. Zeolite, which reduces permeability, is a typical concrete ingredient that strengthens and lasts. Recently, natural zeolite has become a prominent concrete pozzolanic component. For environmental preservation and sustainable development, various experiments were done on concrete with pozzolanic components partially substituting cement and compared to ordinary concrete. A partial replacement of cement with zeolite improves the properties of concrete up to a certain age and mixing ratio. More than 44 relevant articles from 2004–2024 were selected from 762 papers evaluated for this paper. This paper reviews natural zeolite research in real applications. Additionally, it provided a cutting-edge review of natural zeolite literature through a critical analysis of various previous investigations. It also helped to understand how zeolite influences concrete mixture workability, strength, and durability. Since zeolite is a major concrete ingredient, it should be promoted as a sustainable resource.