×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerMany joints in the body depend on cartilage for their mechanical function. Since cartilage lacks the ability to self-heal when injured, treatments and replacements for damaged cartilage have been created in recent decades. The mechanical tests had an important role in the treatment and designing of the replaced cartilage. There are two types of cartilages in the knees: fibrocartilage (the meniscus, it is a special type of cartilage) and hyaline cartilage. Its mechanical properties are important because structural failure of cartilage is closely related with joint disorders. This study aimed to determine the stress-strain curve to give broader understanding of the material’s properties. The results of this study could help to develop computational models for evaluating mechanics of knee joint, predicting possible failure locations and disease progression in joints.The study involved two specimens taken from bovine, the first was the articular cartilage with subchondral bone and the second was the meniscus cartilage each one loaded on a compressive testing machine to compute the displacement, and the force applied, enabling the calculation of the stress-strain curve of the material.Specimen failure occurred in the articular cartilage surface at a force break of 73.8N and get force peak about 87.2 N. The meniscus cartilage failure had occurred at a force break of 29.2 N and get force peak about 34.9 N.
Over the last several years, additive manufacturing (AM), sometimes known as "3D printing", has seen remarkable expansion due to mechatronics and materials science advancements. Fused filament deposition (FDM) production is the predominant technology in additive manufacturing (AM) because of its cost-effectiveness in operational and material expenses. Nevertheless, the materials often used for this technique are pristine thermoplastics. Unsuccessful printing and throwaway prototypes generate a significant quantity of trash. Utilizing green and sustainable products is crucial to minimize the environmental effects. Recycled, bio-based, and mixed recycled materials provide a promising solution for 3D printing. The absence of comprehension about the interlayer adhesion process and material degradation in FDM printing has presented a significant obstacle for these environmentally friendly materials. This study comprehensively examines many materials used for FDM three-dimensional printing filaments, including recycled, bio-based, and mixed materials. The merits and drawbacks of thermoplastics and their composites were deliberated over. This evaluation is a comprehensive guide for engineers and researchers in selecting appropriate materials for three-dimensional printing. Three-dimensional printed objects have worse mechanical characteristics in comparison to injection molded materials.
Biodegradable polymers are very useful polymers in biomedical applications. In this research, several hydrogels were fabricated by using two polymers, Polyvinyl alcohol (PVA) and Chitosan (Chs) by the solvent casting method in order to use them for skin applications. Several tests were carried out on these membranes such as Agar diffusion method to examine their antimicrobial activities, Fourier transform infrared microscopy (FTIR) test to study the differences in their chemical structures. Uniaxial tensile test was performed to examine the mechanical characteristics of these membranes. In addition, the wettability test was used to investigate the hydrophobicity or hydrophilicity of the surfaces. The results showed that all membranes are hydrophilic, of which the contact angles are less than 90°. The membrane manufactured from 75:25 Chs-PVA is more hydrophobic (contact angle is 74°) than other membranes made of 50:50 Chs-PVA and 25:75 Chs-PVA as the contact angles were 59° and 61°, respectively. The tensile test results indicate that the membrane fabricated of the PVA and the membrane that was fabricated by 75% Chs and 25% PVA has the highest tensile strength of 17.9 MPa, 16.2 MPa and Young^’ s Modulus of 181.2 MPa and 7.18 MPa, respectively. The highest strain at break was observed by the membrane of 25:75 Chs-PVA which equals to 24.67%. Chitosan membranes showed inhibition zones of about 2.99 cm and 2.75 cm in length, and 75:25 Chs-PVA membranes showed 5.1 and 5.91 cm in length for E.coli. To sum up, this copolymer is considered as promising hydrogel for skin applications such as wound dressing.
Rutting is the most common distress that most Iraqi asphalt pavements suffer from it. Asphalt binders are modified by using additives and polymers to enhance their physical qualities and fulfill the performance demands. Polyphosphoric acid (PPA) has been used in many countries to enhance the physical and mechanical characteristics of asphalt binders and mixtures that can improve the performance of asphalt pavements. In this paper, evaluation of the Iraqi asphalt binder and mixtures performance by using three percentages of Polyphosphoric acid (PPA) (0.4, 0.8, and 1.2) percent by asphalt binder weight and added to (60-70) penetration grade asphalt binder to show the applicability and suitability of using PPA in asphalt pavement in Iraq. Original asphalt binder and modified are subjected to traditional tests which are penetration, ductility, softening point, and viscosity. Results show better performance and enhancement of the physical properties of the modified binder. Other tests are Marshall Stability and wheel track tests. The results of the addition of PPA to the asphalt mixture show increases in the Marshall Stability and enhance the performance of the asphalt pavement mixtures. The wheel track test is applied to the original and modified mixture at two test temperatures 40 ?C and 50 ?C and the results show a decrease in the rut depth when the percentages of PPA increase. It is concluded that %PPA addition will enhance the performance of the Iraqi asphalt pavement and the mixture will be more rutting resistant, especially in high-temperature weather.
This research studies the physical and mechanical properties of mortar composed of PVC plastic waste particles used as fine aggregate replacement material. PVC particles in quantities of 5%, 10%, 15%, 20%, 25%, and 30% by volume were used for sand fraction substitution. This quantity of PVC was used to formulate seven mixes with a cement content of 525 kg/m3 and a water-to-cement ratio (w/c) of 0.45. At 7 and 28 days, the compressive and splitting tensile strengths of the mortar's mechanical characteristics were evaluated. Additionally, the physical characteristics of density and absorption were investigated. The findings demonstrated that the mechanical properties and density of mortar containing PVC powder were minimized.