×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis paper tests the effect of noise on digital images. Since Gaussian noise can affect almost all computer and communication systems and therefore can come from various natural sources, it was interesting to measure the effect of such noise on features of the image. To generate the noisy images, a few images were used with Gaussian noise, and a data set was applied to this purpose. The wide variety of noise parameters was measured using the same input image with different mean and variance values each time. Gaussian noise was then removed with enhancement filters. In all fields of online communication, multimedia systems, medical imaging, and military communications, digital images have important roles to play. Internet and cellular networks are storing and delivering colored images. A lot of data needs to be protected from unwanted access. In cryptography, messages are encoded to render them unintelligible. Security of data is always essential. There are different cryptographic algorithms for encrypting and decrypting images. Our purpose of this study is to encrypt and decrypt the images with the help of the Advanced Encryption Standard (AES) algorithm for authentication. This paper guarantees that after processing, the quality of the image is maintained and no corruption was occurred
The present work demonstrates the optimization process of Micro- hole of Electrical Discharge Machining (EDM) by Adaptive Neuro Fuzzy Inference System (ANFIS). The workpiece material was copper alloy. The current, gap distance and pulse on time were the control parameters of EDM. The process has been successfully modeled using ANFIS model constructs a fuzzy inference system in MATLAB 7.2 Software Gaussian type for optimization of micro diameter, were adopted during the training and testing process of ANFIS model in order to compare the prediction accuracy of micro diameter by one membership function. Finally, the comparison of ANFIS results with experimental data indicates that adoption of Gaussian membership function in proposed system achieved satisfactory accuracy. Prediction using ANFIS model compared with experimental values of micro holes at correspond ratio 98.37%.
This paper discusses the development of a seven-band coherent wavelength-division multiplexing (WDM) system covering the T to U systems, aiming to enhance the capacity and system efficiency. Seven multiband systems (C+L, S+C+L, S+C+L+U, E+S+C+L, E+S+C+L+U, O+E+S+C+L+U, and T+O+E+S+C+L+U) are designed with 40 GBaud symbol rate, 50 GHz channel spacing, and dual-polarization (DP)-16QAM signaling. The analysis adopted the enhanced Gaussian noise model, considering the amplified spontaneous emission of inline optical amplifiers and nonlinear interference (NLI) from fiber nonlinear optics, including Kerr effect and stimulated Raman scattering (SRS) which it implemented using Matlab (Ver. 2020b) program. The results show that the optimal powers are -4, -5, -5, -4.5, -3.5, -6, and -4.5 dBm for the seven WDM systems, respectively. Further, with a fiber span length of 100 km, the C+L system has the longest transmission reach of 20 span. However, using S+C+L+U system gives the highest bit rate-distance product of 1619 Tbps.km. The O+E+S+C+L+U and T+O+E+S+C+L+U systems are designed with 50 km-span length to reduce the effect of NLI caused by the large numbers of channels (1060 and 1200, respectively).
Recently, there is increasing interest in using the 18 THz bandwidth offered by S+C+L band to increase the transmission capacity of fiber communication systems. This leads to the generation of ultra-wideband (UWB) wavelength-division multiplexing (WDM) optical communication systems. In these advanced systems, stimulated Raman scattering (SRS) causes a power transfer from high-frequency channels to low-frequency channels. This effect leads to an increase in the nonlinear interference (NLI) between the UWB-WDM channels. Power optimization techniques are required to balance transfer power between band channels, thus increasing the maximum transmission reach (MTR) along with increasing system capacity. In this paper, the transmission performance of S+C+L band system operating with dual-polarization 16-QAM signaling is investigated using enhanced Gaussian noise model. The transmitter and receiver for each DP channel use a -polarized laser and incorporate two identical configurations, one for x- and the other for y-state of polarization (SOP). The results are presented for two values of symbol rate, 40 and 80 GBaud, where the system carries 360 (=160+80+120) and 180 (=80+40+60) channels, respectively. The results revel that the MTR of both cases is equal to 12 100 km-spans when the channel lunch power equals to -4 and -2 dBm, respectively. This work also shows the effect of NLI components as a function of the number of spans, channel spacing, and channel launch power. The results show that the cross-phase modulation component of the NLI has high accumulated value with transmission distance, while the self-phase modulation component is almost constant.
Public school building projects in Karbala Province experiences payment problems due to improper cash-flow planning by both parties; contractors and clients. These payment problems lead to work stoppages and conflicts. This research aims at developing a suitable model to forecast the expected contractors’ cash-in-flow in public school building projects in Karbala based on historical data. Complete sets of interim payments of (33) out of (38) school building projects finished in the years (2007-2012) in Karbala were interpolated using seven different regression methods namely; Polynomial, Gompertz, Morgan-Morgan-Finney, Logistic, Exponential, Gaussian and Linear in order to identify the best-suited model. It is found that the third degree polynomial model is more suitable for cash-in-flow forecasting of the case under study with coefficient of correlation of (97.89%) and standard error of (0.0441). Data of the remaining (5) projects were used to test the validity of the best-fitted model using Mean Absolute Percentage Error, Root Mean Square Error and Average Accuracy Percentage. The model is expected to be of high advantage in predicting contractors’ cash-in-flow in public school building projects in Karbala, and consequently clients’ cash-out-flow as well._x000D_