Vol. 22 No. 1 (2019) Cover Image
Vol. 22 No. 1 (2019)

Published: March 31, 2019

Pages: 1-8

Articles

Dynamic Modeling of Three Links Robot Manipulator (Open Chain) with Spherical Wrist

Hassan Mohammad Alwan 1 Zaid Hikmat Rashid 2
1 Mechanical Engineering Department, University of Technology, Baghdad-Iraq.
2 Mechanical Techniques Department, Al-Mussaib Technical Institute, ATU, Babylon-Iraq.
History
  • Received: October 2, 2018
  • Revised: December 9, 2018
  • Accepted: January 30, 2019
  • Available Online: March 27, 2019
DOI

https://doi.org/10.29194/NJES.22010001

Abstract

Dynamic modeling of a robot manipulator is a central problem in an accurate robot control. In this paper; the dynamic equations of motion were derived by using Eular-Lagrange method for a six degree of freedom articulated robot manipulator based on the geometrical jacobian construction for each link and actuator. In addition, friction effects beside the end effector forces that act the environment are considered. A Matlab Simulink plant is developed to embrace the theoretical work and simulate the dynamic response for a designed nonlinear controller Proportional Derivative plus Gravity (PD+G), also a modified controller is applied to reject the disturbances and the internal friction effect where the settling errors were 3.57E-6, 2.09E-7, -3.63E-6, 8.84E-6, -5.39E-8 and -4.39E-5 (deg) for joints one to six respectively. The presented approach can be applicable to solve the dynamic problem of other n-link robot manipulators and achieve a suitable solution for tracking trajectories.

Keywords

References

  1. K. M. Lynch and F. C. Park, Introduction To Modern Robotics Mechanics, Planning, and Control, no. May. 2016.
  2. J. Kardoš, “The simplified dynamic model of a robot manipulator,” in Proceedings of the 18th International Conference–Technical Computing Bratislava 2010, 2010.
  3. M. W. M. H. Hadi and D. R. W. I. M. ALTameemi, “Modeling and Control of 5250 Lab-Volt 5 DoF Robot Manipulator,” IRAQI J. Comput. Commun. Control Syst. Eng., vol. 15, no. 2, pp. 34–46, 2015.
  4. H. M. Al-Qahtani, A. A. Mohammed, and M. Sunar, “Dynamics and Control of a Robotic Arm Having Four Links,” Arab. J. Sci. Eng., vol. 42, no. 5, pp. 1841–1852, 2017.
  5. A. K. J. and R. B. M. hatem al-dois, “dynamic analysis of serial robot manipulators,” IJAMS, vol. 15, no. 2, 2015.
  6. A. Izadbakhsh, “Closed-form dynamic model of puma 560 robot arm,” in ICARA 2009 – Proceedings of the 4th International Conference on Autonomous Robots and Agents, 2009, pp. 675–680.
  7. B. Armstrong, O. Khatib, and J. Burdick, “The explicit dynamic model and inertial parameters of the PUMA 560 arm,” in Robotics and Automation. Proceedings. 1986 IEEE International Conference on, 1986, vol. 3, pp. 510–518.
  8. Y. D. Patel and P. M. George, “Performance Measurement and Dynamic Analysis of Two Dof Robotic Arm Manipulator,” Int. J. Res. Eng. Technol., vol. 02, no. 09, pp. 77–84, 2013.
  9. H. Alwan and Z. Rashid, “Investigation and Simulation the Kinematic Singularity of Three Links Robot Manipulator with Spherical Wrist,” JUBES, vol. 26, no. 8, pp. 77–87, 2018.
  10. R. N. Jazar, Theory of applied robotics: kinematics, dynamics, and control. Springer Science & Business Media, 2010.
  11. M. W. Spong, S. Hutchinson, and M. Vidyasagar, Robot modeling and control, vol. 3. Wiley New York, 2006.
  12. Hassan Mohammad Alwan and Zaid Hikmat Rashid, 2018. Kinematic Analysis and Simulation of Three Link (Open Chain) Robot Manipulator with Six DOF. Journal of Engineering and Applied Sciences, 13: 1829-1834. .
  13. L. Sciavicco and B. Siciliano, Modelling and control of robot manipulators. Springer Science & Business Media, 2012.
  14. C. T. Lewis, Frank L.; Dawson, Darren M.; Abdallah, Manipulator Control Theory and Practice. 2004.