×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerAccurately identifying the kind and amount of dissolved metal salts in wastewater used in oil refining processes is an iconic feature of ultraviolet and visible absorption spectroscopy. This method relies on the dissolved metal salts' ability to absorb light at certain wavelengths after reacting with it. The experiments were conducted in a lab setting with a broadband source (200-800 nm) to measure the absorbance of dissolved element salts and precisely identify the lowest concentration up to 2 ppm. A mixture of the mineral salts from oil refining operations was prepared and diluted to different concentrations using a standard solution. This allowed us to study and compare this result with the absorbance behavior of the wastewater from the Al-Dora Refinery. The two results reinforced that we can accurately estimate the detection parameters for the lowest water contamination. These materials are lead nitrate (PbNO3), phenol, calcium carbonate (CaCO3), sodium chloride (NaCl2), sulfide (SO4), and nitrate (NO3). At wavelengths of 340, 404, and 741 nm, the concentrations (10, 20, 30, 40, 50, 60, 70, 80, 90, and 100) ppm were found, and for the concentration of 10ppm, the absorbance (0.15323, 0.15326, and 0.14685) was found, respectively. The process that has been tested with varying concentrations is considered and simulates the variation in river water concentrations caused by the river's water level and flow rate changes by the effect of rain abundance and thawing. It is fast, accurate data analysis, and a lower cost compared with the other chemical analysis and conventional methods.
This work investigated the removal of the reactive green (R.G) dye from wastewater using the photo-Fenton process. Batch experiments were carried out to research the role of the Impacts of operating parameters. The dosage of H2O2; dosage Fe+2; pH; temperature, and irradiation time were examined. Maximum decolorization efficiencies green dye were achieved at the [H2O2]=100 ppm; [Fe2+]=20 ppm; pH 3; temperature=56 °C and irradiation time=90 min. This research focuses on modeling, kinetics and thermodynamics of the removal of pollutant (reactive green dye) of water. The results showed that the decolorization kinetic of R.G followed pseudo-first-order reaction kinetic. Also the thermodynamic parameters ?G?, ?H? and ?S? were determined using the Van't Hoff equation for the oxidation processes. The changes in Gibbs free energy showed the oxidation process under normal conditions is non-spontaneous.
Industrial activities significantly affect the environment by releasing many organic pollutants, including industrial dyes, phenols and antibiotics, which produce wastewater. Effective removal of these substances from wastewater has appeared as a noticeable research field owing to its environmental significance. Exorbitant operational expenses and the potential generation of supplementary pollutants load conventional techniques like adsorption, membrane separation, and coagulation. Semiconductor-based photocatalysis has effectively degraded organic contaminants into less toxic or biodegradable compounds. The construction of robust visible-light-sensitive photocatalytic hybrids for environmental decontamination is an inspiring task for researchers. The exceptional photocatalytic performance of silver halides (AgX, where X is I, Cl, and Br) has recently attracted significant consideration as photocatalysts. Moreover, the combination of silver halides with other photo-active semiconductors to create efficient visible-light-driven photocatalyst heterojunctions has significantly promoted the broader application of the photocatalysis process with enhanced efficiency. Ag-silver halides/semiconductors heterojunctions have developed as crucial components in efficient composites for photocatalysis through surface plasmonic actions, helping with visible light absorption. The current study overviews the most recent Ag and silver halide-based composite photocatalysts. Additionally, it provides an essential understanding of their promoted photocatalytic performances and their main applications in organic pollutant degradation. Moreover, the photocatalytic mechanisms and environmental applications of AgI and composites were discussed.
The purpose of this study is to investigate the potential of biochar derived from Peganum harmala (Pgh) seeds as an adsorbent material for wastewater treatment. Biochar is a cost-efficient, ecologically friendly, and effective bio-sorbent for a wide range of pollutants in wastewater. Researchers are investigating the production of biochar from novel biomass sources. Phosphoric acid (H3PO4) was utilized in a chemical activation technique to produce biochar at various concentrations (20%, 30%, and 40%). The pyrolysis process lasted three hours at 600°C in a tube furnace with an inert nitrogen gas atmosphere. Elemental analysis, Brunauer-Emmett-Teller (BET) nitrogen adsorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), The biochar was characterized using several techniques, including elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) nitrogen adsorption, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The findings demonstrate the significant potential of Pgh seed-derived biochar as an inexpensive and ecologically acceptable sorbent material. A large surface area (691.58 m2g−1) was achieved at 600◦C for three hours with 40% H3PO4 activation.
The presence of heavy metal pollutants in refinery effluent significantly impacts the corrosion rate of carbon steel. The focus of this research is to analyze the impact of various inorganic pollutants, including copper, vanadium, nickel, and chromium ions, on the corrosion of carbon steel across different solutions. After conducting a thorough examination of various operating conditions, including pollutant concentration (ranging from 300-3000 ppm), temperature (30-60? C), and flow velocity (0-800 rpm). Our research shows that copper ions have the highest corrosion rate, with vanadium ions being a close second. Conversely, nickel and chromium had the most negligible impact on corrosion rate and, in some instances, even exhibited corrosion inhibition effects. It was also observed that an increase in flow velocity and temperature significantly amplified the corrosion rate of the metal ions investigated.