×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerFriction stir spot welding (FSSW) is a modern solid-state joining process able to weld similar and dissimilar overlap joints in different classes of materials and is widely being considered for automotive industry. In this work, the mechanical behavior ) i.e. tensile shear tests, Microhardness(, and microstructure of friction stir spot welded joints were studied for AA6061-T6 aluminum alloy sheets with thickness of 1.6 mm. Series of FSSW experiments were conducted using vertical CNC milling machine type "C-tek". FSSW is carried out at different pin profiles (cylindrical, taper, and triangular) and tool rotational typically speeds, i.e. 800, 1000, 1200 and 1400 rpm. Based on the welding experiments conducted in this study, the results show that sheets welded by triangular pin tool have highest tensile shear load, of 3.2 kN, followed by welds with cylindrical pin, while welds made using taper pin has the tensile shear load 2.1 kN at optimum speed of 1200 rpm. Also the pin shape and rotational speed had an obvious effect on microstructural parameters i.e. hook height and bond width.
Friction stir welding (FSW), a solid-state welding process, it’s involve a welding by friction between two metals or alloys, and also using for the joining of dissimilar materials due to the lower processing temperature over conventional fusion welding, it's include only one pass of welding. Friction Stir Processing (FSP) is a recent outgrowth of the Friction Stir Welding (FSW) process and relies on solid-state deformation to modify the structure of the workpiece, it's involve two pass or more of welding and applied either on the base metal(BM) or to join the two alloys/metals. In this paper the new method used, namely reverse rotation friction stir processing (RFSP), this research aims to study the effect of (RFSP) technique on the mechanical properties of welded alloys. (FSW) includes a single pass of the welding line but the second method (RFSP) involves two pass of welding (forth and back) but the 1st pass with a rotation speed in clockwise and the 2nd pass in counter-clockwise. The alloys used of dissimilar AA 2024 and AA6061 aluminum alloys of (3mm) thickness, the parameters used in this research include different rotational speed (1600, 1800, 2000 and 2200) RPM and one feed speed (25) mm/min. In the tensile test the results of reverse rotation friction stir processing (RFSP) was higher than friction stir welding (FSW) for all rotation speeds of welding except (1800 RPM). In the microhardness measurement the values of hardness for all samples at the nugget zone is higher than the basemetal of 6061-T6 and lower than the basemetal of 2024-T3. The efficiency of ultimate tensile strength reaches to about (72 %) for (RFSP) as compare with value of (FSW) and it’s about (44%) at rotation speed (1600 RPM).The only exception of welding was when the rotational speed of (1800 RPM), where the (FSW) is better than (RFSP), efficiency was approximately (77%) for the (FSW) compared with the results of (71%) (RFSP).
The hydrodynamics of stirred tanks and bubble breakup are crucial in gas-liquid flows, yet this system has not been well characterized for different operating conditions. In this work, the numerical method was used to investigate the hydrodynamics of six- flat blades impeller (Rushton turbine) and the results were employed to understand the bubble breakup behavior in the stirred tank. Simulation results of predicted flow pattern, power number, and the distribution of turbulence energy generated were performed with COMSOL Multiphysics. Numerical results showed good agreement with the experimental literature. The effect of rotational speed on bubble breakup behavior, such as breakage probability, the average number of daughter bubbles, and the breakage time was investigated using the high-speed imaging method. The main finding is that the breakage process occurs in the high energy area of high turbulence intensity, which is located within a distance equal to the blade width of a radius of (15-35 mm). The breakage probability (Bp) was found to be increased by 12.61 percent for a mother bubble of 4 mm at 340 rpm, with an average fragmentation of up to 22 fragments. Furthermore, the bubble breakage time was found to decrease with increasing impeller rotational speed, with an average value of 19.8 ms.
Friction Stir welding (FSW) parameters, which play a vital principle, that impact on the mechanical, microstructural properties of the weldment because of the warmth produced by the contact between the instrument and work-piece, An AA6061-T6 aluminum composite plate with measurements (186*150*4) mm3 welded through various rotational paces 800, 1000, 1200 and 1450 rpm, the created heat measured through thermocouples embedded in study zones of the Weldment, a Finite Element model have been executed by utilizing ANSYS 12.1 bundle charges to ponder the temperature appropriation amid stay stage, the outcomes demonstrates a decent assention between the after effects of exploratory and hypothetical tests. The most extreme temperature measured at this condition was 0.71 from the liquefying temperature of the sample at a maximum rotational speed of (1450) r/min.
The most important way for joining the non-welding aluminum alloy is Friction stir spot welding. Three parameters effect on efficiency of welding: tool shape, rotational speed, and plunged time, are chosen to study for welding 6061T6 aluminum alloy. Each of the above parameters has three variables as: pin shapes (square, cylinder, and hexagonal), plunged time (50, 70,100) sec and rotational speeds (710, 1120, 1800) rpm hybrid approach which is consist of the experiment run, neural network and social spider optimization is used to optimize the welding conditions by finding the maximum ultimate force. The best condition of the weldments is (square, 710rpm, 100sec) with maximum shear force 4740N. The best results obtained from hybrid optimization with experimental results; with discrepancy of 2%.
Friction Stir Welding is one of the most practical welding process at the solid state. Friction Stir Processing is used to enhance the microstructure of FSW welded zone. The present study investigates the effect of welding parameters on the tensile properties of FSW and FSP joining 3 mm AA 5083 - H111 aluminum alloy by means of stress – strain curve with a uniaxial tensile test and by comparing the efficiency between FSW , FSP and base metal .The experiments were conducted with 1000,1500 and 2000 rpm rotation speeds ,and 20,40 and 60 mm/min travel speed. The best result of the welding joint was shown at the 20 mm/min feed speed and 1500 rpm rotational speed for FSW, and 40 mm/min feed speed and 1500 rpm rotation speed for FSP. The efficiency of ultimate tensile strength reaches to 92% for FSW and 94% for FSP.
Galvanic corrosion of Nickel-Chrome alloy (Ni-Cr alloy) and Copper (Cu) coupled in 5% sulfuric acid solution was investigated. The effects of agitation velocity, temperature, and time on the galvanic corrosion current and the weight loss of both metals in both free corrosion and galvanic corrosion were investigated. The trends of open circuit potential (OCP) of each metal and galvanic potential (Eg) of the couple were also determined. The results showed that Cu was cathodic relative to Ni-Cr alloy in galvanic couple and the corrosion potential of the couple (Ni- Cr alloy /Cu) was between the values of the two single components because the OCP of copper shifted to positive with the increase in velocity. Under stagnant conditions initially the galvanic current was more negative then shifted to the positive with time. The corrosion of Ni-Cr alloy decreased with time because the passivation layer was formed on the surface. Under flow conditions, the galvanic current sharply shifted to the negative direction (increase galvanic current from Ni-Cr alloy (anode) to Cu (cathode) during the first few minutes.
Incremental forming is a flexible sheet metal forming process which performed by utilizes simple tools to locally deform a sheet of metal along a predefined tool path without using of dies. One limitations of single point incremental forming (SPIF) process is the error occur between the CAD design and the product profile. This work presents the single point incremental forming process for produced pyramid geometry and studied the effect of tool geometry, tool diameter, wall angle, and spindle speed on the dimensional accuracy. Three geometries of forming tools were used in experimental work: ball end tool, hemispherical tool, and flat with round corner tool. The sheet material used was pure Aluminum (Al 1050) with thickness of (0.9 mm). The experimental tests in this work were done on the computer numerical control (CNC) vertical milling machine. The products dimensions were measured by utilized the dimensional sensor measuring instrument. The extracted results from the single point incremental forming process indicated the best acceptance between the CAD profile and product profile was found with the ball end tool and diameter of (10 mm), wall angle (50°) and the rotational speed of the tool was (800 rpm).