×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerBehavior of composite beams with headed stud shear connectors subjected to monotonous and displacement controlled non-reversible repeated loadings has been evaluated through studying influences of the cross-sectional proportioning, the degree of partial interaction, and the level of ductile deformability in the post-yielding stage, in addition to the state of loading (whether monotonous or repeated). Eleven one- third scaled composite beams (with their push-out segments) were manufactured and tested in five pairs (each comprising the two loading cases representing one varying studied parameter) beside the single standard composite beam dedicated to verify accuracy of the test results by comparing them to the prototype ones (three authorized experimental and analytical investigations) where no distinction (other than 7 % difference) between the results of the three authorized refereed investigations (experimental, analytical and Eurocode) and the present one.Regarding the flexural resistance in repeatedly loaded composite beams, it has been found that lowering the neutral axis (by adding bottom steel plate) has significantly increased the beam flexural resistance by an average of 24.7 %. Meanwhile, the intensity of headed studs distribution in stiffened repeatedly loaded composite beams has revealed a vital role in controlling the severity of the post-ultimate flexural weakening, where decreasing number of the headed studs to the half has increased the value of that unfavorite parameter by 160.58%. Furthermore, that specified decrease of headed stud intensity has lowered the advantageous residual cyclic flexural ductility by 19.37 % and 11.48 % without and with stiffening bottom steel plates, respectively. Regarding the effect of the lengthening the headed stud on behaviour of the repeatedly loaded composite beams it has been found that lengthening the medium-length headed studs by 72% has raised the flexural stiffness by 41.1 %, while it has decreased the residual cyclic slippage index by 54.3 %.
This article provides a general up to date review of the investigation on performances and resistances of plain and fiber containing concrete structures under periodical loadings of long endurance up to fatigue failure. Structures are almost, under the frequent influences of repeated loadings such as vibrations of rotary machines, sea /river waves, wind, earthquakes and moving vehicles. Long term application of cyclic loading leads to continually slow rate degradation of the structure rigidity leading to fatigue damage. In spite of the dominant usage of concrete, worldwide, as a building material, its fatigue behavior is not straight forward. In addition, this lack of comparison is confronted for fiber fortified concrete. The article also presently a survey of the available techniques for monitoring and measurement of fatigue impressions in concrete structures founded both their impact within the treatise domain and the non-destructive inspection. Those technical means are classified into, at least, two designations, specifically, the monitoring of fatigue induced cracking and the detection of fatigue charged damage. Those techniques parameters, evaluate the changes in the mechanical and physical materials properties during the fatigue endurance, are distantly reviewed in concern of the mechanism creating the change, shortcomings, constraints, etc. The merits, dependency, feasibility, disadvantages and limitations of each technique are assessed and compared to make an index to select the appropriated e technique for fatigues fracture or failure inspection of the type fibered or not of structural concrete