×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerLaser annealing represents a powerful method for tailoring the properties of silver nanofilms on quartz substrates, offering advantages in terms of precision, scalability, and functionalization. Continued research efforts are expected to deepen our understanding and broaden the applications of this promising technology in diverse fields. In this work, laser annealing of silver nanofilms deposited on quartz substrates was performed and investigated. RF CO2 laser of variable power in the range 1–20 W with beam quality of 1.1 was used to anneal silver nanofilms. AFM analysis emphasized that nanocrystal sizes of 60 nm were obtained for silver nanofilms. Furthermore, the optimum absorbance peak occurred at about 449 nm for smaller film thickness. Thermal simulation and analysis of the annealing process were also conducted using COMSOL Multiphysics software. It was observed that optimal temperature of 729 K was achieved when 10 W laser power and 2 mm/s scanning speed were used to anneal 20 nm silver film thickness. Design of expert analysis was also used to better understand the laser annealing process of silver nanofilms since convolution of several process parameters affect the process output.
Magnesium oxide nanoparticles were deposited by laser pyrolysis process. Three types of lasers were employed CW CO2, Q-switched Nd-YAG (short pulses) and long pulses Nd-YAG lasers. The size and density of nanoparticles vary with laser energy, power, pulse duration and the scanning speed of the laser. In this method, MgO nanoparticles were deposited by a laser beam on a quartz substrate from aqueous solution of magnesium nitrate. AFM images reveal formation of small nanoparticle size of 24.5 nm with surface roughness 6.97nm by Q-switched Nd-YAG laser (10 ns) when the energy was 1J. While for CO2 laser, the smallest size was 18.8 nm at 0.4mm/s scanning speed with surface roughness 5.21nm at the same scanning speed. Moreover, long Nd-YAG pulses laser produces relatively larger average size of 37.5nm at 0.8ms pulse duration. The absorption spectra from UV-Visible spectroscopy were also conducted. The best absorption intensity was obtained at a wavelength ranging between 420-430 nm for both lasers. Finally, Thermal analysis using COMSOL Multiphysics software for the deposition process reveals that maximum temperature about 440Kfor Q-Switched Nd-YAG laser at 1J laser energy. While for RF CO2 laser, the maximum temperature obtained at 0.4mm/s scanning speed is 850K.This work provides a good knowledge for the deposition of nanoparticles using laser beams.
The oil industry has a direct impact on the economic feasibility of other sectors and is considered to be the most important energy source used to turn the wheels of other industries. Therefore, it was necessary to pay attention and continuously develop this industry, to find the best modern techniques for designing, pre-commissioning and controlling process, to improve efficiency, preserve energy and achieve the highest production of costly components with the highest purity of the product. This study aims to provide a literary analysis of the stages of development and progress of the dynamics and control of the petroleum industry, in particular the distillation column, because it is multivariable with high interaction between control cycles, nonlinear behaviour and large gains. Control processes have undergone many developments and modernizations to achieve the best results. Various control methods have been used, ranging from simple proportional-integral-derivative controller (PID) to advanced control strategies such as model predictive control (MPC), multivariate model predictive control (MMPC), fuzzy logic control (FLC), quadratic dynamic matrix control (QDMC), artificial neural network control (ANN) and other advanced control techniques. The authors concluded from the review that the advanced control strategies superior than the conventional methods.