×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerExpansive soil poses significant challenges for civil engineers worldwide since it seriously affects the structures built upon it. This soil has a very active group of minerals called montmorillonite, which is responsible for the significant volume change it exhibits. For a number of years, chemical additives have been utilized to stabilize soil, with various levels of success. Soil stabilization has involved the use of a variety of additives, including cement, lime, polymers, salts, and combinations of these. However, lime is very often used for expansive soil stabilization as it improves the soil's mechanical properties. The effects of adding three percentages of lime (3%, 6%, and 9%) to expansive soil to improve its engineering properties are investigated through several tests. The laboratory tests consist of standard compaction, sieve analysis, atterberg limits, hydrometer, California bearing ratio, consolidation test, swelling potential, and specific gravity. The test results displayed that the plasticity index, liquid limit, swelling potential, and maximum dry density, specific gravity decreased using (3%, 6%, and 9%) lime. In contrast, the plastic limit, and optimum moisture content increased using (3%, 6%, and 9%) lime. The California bearing ratio is increased from (12.13% to 14.65%) by adding (9% L). The swelling index and compression index are decreased from (0.070 to 0.030) and from (0.581 to 0.193) respectively by adding (9% L). The swelling percentage is reduced from (18.77% to 6.03%) by adding (9% L).
Most of the soils suffered from significant geotechnical problems dependent on factors like the type of soil, soil composition and mineralogy. Specifically, the problems related to mechanical and physical properties of soils. Several studies have been used to mitigate the adverse effects of soils through using either additive conventional materials such as cement, lime or these soils blending with produced material and chemical materials. This paper focuses on stabilizing or improving different soils using sustainable materials. These materials provided environmental and economic benefits while mitigating a health hazard, storage problems, and a potential pollution source. They can be classified according to these sources into four groups: industrial waste (by-products), agriculture waste, domestic waste and mineral waste. According to the results of this review, compaction characteristics, California bearing ratio and unconfined compressive strength have been studied and discussed in this paper.