×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerThis work investigated the removal of the reactive green (R.G) dye from wastewater using the photo-Fenton process. Batch experiments were carried out to research the role of the Impacts of operating parameters. The dosage of H2O2; dosage Fe+2; pH; temperature, and irradiation time were examined. Maximum decolorization efficiencies green dye were achieved at the [H2O2]=100 ppm; [Fe2+]=20 ppm; pH 3; temperature=56 °C and irradiation time=90 min. This research focuses on modeling, kinetics and thermodynamics of the removal of pollutant (reactive green dye) of water. The results showed that the decolorization kinetic of R.G followed pseudo-first-order reaction kinetic. Also the thermodynamic parameters ?G?, ?H? and ?S? were determined using the Van't Hoff equation for the oxidation processes. The changes in Gibbs free energy showed the oxidation process under normal conditions is non-spontaneous.
This study has been performed to compare the compartmental modeling of two types of extravascular routes, sustained-release (SR) oral dosage forms and intramuscular (IM) injection. Twenty healthy volunteers received a single dose of 100 mg Diclofenac Sodium (DS) sustained-release tablet, then 75 mg DS Intramuscular injection after two weeks washout period. The concentrations of DS in plasma were measured using reverse-phase high-performance liquid chromatography (HPLC). The data analyzed using compartmental modeling, with single time-variant input and output. Primary kinetic parameters for both formulations, ( , , ) and other kinetic parameters were evaluated. The result shows that the IM injection needs a shorter time to reach the maximum concentration with convergent bioavailability to SR oral dosage forms, in another hand the data of IM injection fitted to single-compartment model with a correlation coefficient of 0.93 and the data of SR tablet fitted to two-compartment models with a correlation coefficient of 0.97.
The heavy metals are considered dangerous pollutants which harm health and environment. The adsorption process is the cost effective process to get-rid of heavy metal efficiently. In this study, the adsorption bed of Nickel is simulated by using COMSOL Multiphysics to find the effect of different operating parameters namely; flow rate, temperature and pollutant concentration on adsorption bed efficiency. The modeling of non-isothermal adsorption bed based on experimental isotherms kinetic of previous work is developed too. The results showed that the optimal conditions to generate maximum removal efficiency of heavy metal were at 50?C inlet temperature, 0.1 M inlet concentration, and 80 ml/min flow rate to achieve removal values higher than 50 % of long operation period time.
The purpose of this study is to investigate the potential of biochar derived from Peganum harmala (Pgh) seeds as an adsorbent material for wastewater treatment. Biochar is a cost-efficient, ecologically friendly, and effective bio-sorbent for a wide range of pollutants in wastewater. Researchers are investigating the production of biochar from novel biomass sources. Phosphoric acid (H3PO4) was utilized in a chemical activation technique to produce biochar at various concentrations (20%, 30%, and 40%). The pyrolysis process lasted three hours at 600°C in a tube furnace with an inert nitrogen gas atmosphere. Elemental analysis, Brunauer-Emmett-Teller (BET) nitrogen adsorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), The biochar was characterized using several techniques, including elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) nitrogen adsorption, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The findings demonstrate the significant potential of Pgh seed-derived biochar as an inexpensive and ecologically acceptable sorbent material. A large surface area (691.58 m2g−1) was achieved at 600◦C for three hours with 40% H3PO4 activation.