×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerIn this research, we investigate the nonlinear vibration of functionally graded carbon nanotubes (FG-CNTs) for simply supported sandwich cylindrical panels. The sandwich consisting of three layers formed of (FG-CNTs) and isotropic material as (CNT, ALMINUME, CNT). Mechanical properties of the sandwich media are acquired according to a re?ned rule of blend approach. The governing equations were derived using a first-order deformation theory (FOSDT). Four kinds of carbon nanotubes of sandwich cylindrical panels were analyzed. The volume fraction of CNTs is varied. The properties of nonlinear responses and free vibration are studied. The numerical approach employs the fourth-order Runge-Kutta and Galerkine procedure. Which conducted for the dynamic analysis of the panels to present the natural frequencies and non-linear dynamic response expression. The results show that; the natural frequencies and the nonlinear vibration amplitude decrease with the volume fraction and thickness ratio increase. The nonlinear vibration amplitude response increases when increasing the excitation force. The initial imperfection and the elastic foundation have a minor impact on the nonlinear vibration response of the panel. The Pasternak Foundation has a larger impact than the Winkler foundation. The structure formed of FG-CNT present an excellent choice for high-performance of engineering applications.
Recently, considering polymer composite in manufacturing of mechanical parts can be caused a fatigue failure due to the very long time of exposure to cyclic loading and may at environmental temperatures higher than their glass transition temperature; therefore, in this paper, a comprehensive investigation for bending fatigue behavior at room and elevated temperatures equal to 60 °C, 70°C, and 80 °C will be done. Rotating bending test machine was manufactured for this purpose supplied with a connected furnace to perform fatigue tests at elevated temperatures. The obtained results appeared that the increase in applied stress and temperature caused a clear reduction in fatigue life; also the addition of carbon nanotubes enhanced the fatigue life at different temperatures by 183%, 205%, 218%, and 240%, respectively while the addition of short carbon fibers improved fatigue life by 324%, 351%, 387%, and 415%, respectively. As well as, Polyamide 6,6/carbon fiber composite appeared fatigue limit at temperatures equal to 20°C and 60°C and stresses approximately equal to 55 MPa and 38 MPa respectively.