×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerAdditionally, it has been demonstrated that osseointegrated implantation offers superior proprioception and control over the prosthesis, enabling more natural movement and improved functional results. Additionally, it lowers the chance of falling and increases energy transfer efficiency, making it simpler for amputees to engage in physical activity. Furthermore, as compared to conventional socket prosthesis attachment, osseointegrated implantation has been linked to higher patient satisfaction and quality of life._x000D_ It is crucial to remember that osseointegration is a surgical operation with risks including infection and implant failure. Additionally, for effective implantation, it needs a specific amount and quality of bone, which may restrict its usage in some individuals. Furthermore, osseointegrated implantation could be more expensive than conventional socket prosthetics._x000D_ Understanding the efficacy and safety of this method requires research on complication rates and outcome metrics in patients having osseointegrated prosthesis implantation. You may acquire information on things like infection rates, implant failure, patient satisfaction, and functional results by studying original research papers. Clinical decision-making can then be improved with the use of this information._x000D_ In transfemoral amputees, osseointegration has showed promise as a powerful substitute for socket prostheses. A growing corpus of research has shown that osseointegrated implantation provides advantages in terms of increasing mobility, decreasing discomfort, and improving general quality of life. The efficiency of osseointegration for transtibial and upper extremity implants has received little attention._x000D_ Minor soft tissue infections are the most frequent consequences, although they are manageable with the right treatment and monitoring. To further reduce the risk of problems and improve the overall success of osseointegrated implantation, research and development are ongoingly focused on enhancing surgical methods and implant design._x000D_ Although osseointegration has a lot of potential, not all amputees may be good candidates for it. Considerations for osseointegrated implantation must take into consideration elements including the degree and nature of the amputation, the quality and density of the bone, and the desires of the patient.
The most important way for joining the non-welding aluminum alloy is Friction stir spot welding. Three parameters effect on efficiency of welding: tool shape, rotational speed, and plunged time, are chosen to study for welding 6061T6 aluminum alloy. Each of the above parameters has three variables as: pin shapes (square, cylinder, and hexagonal), plunged time (50, 70,100) sec and rotational speeds (710, 1120, 1800) rpm hybrid approach which is consist of the experiment run, neural network and social spider optimization is used to optimize the welding conditions by finding the maximum ultimate force. The best condition of the weldments is (square, 710rpm, 100sec) with maximum shear force 4740N. The best results obtained from hybrid optimization with experimental results; with discrepancy of 2%.
Specimens with the structure of a face-centered cubic were produced using several sets of printing conditions. An experimental testing is conducted to carefully evaluate the microstructural analysis and compressive strength of this structure. The results include the measurement of mechanical properties, such as the peak stress. Fused deposition modeling is employed for the additive manufacturing of experimental specimens made from shape memory polymer thermoplastic polyurethane (MM-3520). We take into account the impact of printing factors on lattice structures, such as layer thickness, printing temperature, and printing speed. Analyzing the microstructure of the printed specimens exhibits that the specimens with highest printing temperature, lowest printing speed and thinner printing layer have better layers adhesion and lower porosities. All the mechanical tests are performed on specimens with the same structure and at a relatively constant density. Among the tested printing parameters, using a layer height of 0.1 mm, a printing temperature of 230 °C, and a printing speed of 20 mm/s yields the highest strength in the specimens. However, specimens printed with a layer height of 0.2 mm, a printing temperature of 220 °C, and a printing speed of 30 mm/s also exhibit good strength, albeit slightly lower than the maximum values. Additionally, when using these specific settings (0.3 mm – 210 °C – 40 mm/s), the mechanical qualities are minimized, yet the stress-strain curves exhibit characteristics similar to elastomers.
Functionally graded material is one of the promising sectors of the material since because of the great ability to control with required product properties could be strongly used in biomedical applications exclusively in the implants sector, this review paper demonstrates briefly about the most prominent known manufacturing methods and focusing on the implants coated by FGM layer manufactured by using EPD method because the EPD has significant properties it could produce FGM layer in the Room temperature without depending on chemical reactions or heat adding, Biomedical application need highly accuracy when we deal with material that directly contact with human tissue because the heat effect could be change the biocompatibility properties and also the chemical reactions could make toxic effect on the produced implants, All these reasons make the EPD one of the favorable method for the FGM coated Implants. this paper will summarise and give the Gide line for the researcher about the most important substrate and suspension materials used in the EPD method and its application.