×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerOne of the major usages for Al–Pb alloy are bearing alloys because of its lubricant behavior of Pb phase component. Applications of these alloys are in heavy duty, such as boring mills, presses, lathes, milling machines and hydraulic pump bushings. In present work, SiC powder was selected as additive for improving the mechanical properties of Al-Pb alloy that produced by mechanical alloying method. The percentage weight of SiC powder are (2.5, 5,10, 15 %) which mixing together with Al- Pb alloy for two hours in ball milling device, then compacted and sintering to obtain the improved alloy, and examine the mechanical properties (compressive strength and microhardness) of produced alloy. Results show that the additive of SiC powder on the Al-Pb alloy lead to improve the microhardness which increased with increased the percentage of additive, in the other hand, the compressive strength had a reverse effective with increased the percentage of SiC powder.
This study aims to enhance the compression strength in one type of Pb-Sn-Sb alloys which wellknown by (Babbitt-ASTM B23 Alloy 13). The ?processing doing via equal channel angular extrusion technique. Three casting were implemented to ?manufacture the alloy; Chill Casting (CC), New Rheocasting (NRC) and Gravity Die Casting (GDC). The ?microscope examination shows that the microstructures contain two phases, ?-Pb and cubic shaped ?intermetallic compound (?-SbSn) in a matrix of ternary phases. CC was fine equiaxed as well as NRC, while ?in GDC was a dendrite ?-Pb phase with remaining ?-SbSn phase as a cubic shape. Higher mechanical properties in compression were recorded for Gravity die casting (12.7 %) while the NRC registered the highest value in yield strength (11.7 %). On the other hand, the casting techniques had a slight difference in Young's modulus. The other resulted data like hardness showed that NRC is the first reading (12.55 %) and then gravity casting recorded as second score comparing with other (11.79 %), The results ?showed aslo that increasing forming temperature during angular extrusion has an adverse effect on compression ?strength. The study ?concluded that microstructural change caused by ECAP softens the material due to the break-up the original ? precipitate and accelerate from the dynamic recrystallization.