Vol. 21 No. 2 (2018) Cover Image
Vol. 21 No. 2 (2018)

Published: April 30, 2018

Pages: 300-307

Articles

Improving the Mechanical Properties of Lightweight Foamed Concrete Using Silica Fume and Steel Fibers

Suhad M. Abd 1 Dhamyaa Ghalib Jassam 1
1 Civil Eng. Dep., Diyala University, Diyala, IRAQ
History
  • Received: December 26, 2017
  • Revised: January 17, 2017
  • Accepted: March 12, 2018
  • Available Online: April 22, 2018
DOI

https://doi.org/10.29194/NJES21020300

Abstract

Lightweight foamed concrete (LWFC) is characterized as a light in self-weight, self-compacting, self-levelling, and thermal and sound isolation. But it has low strength and low ductility which leads  that the application of  (LWFC)  in the building construction is limited. The flowability of the fresh mix of (LWFC) was evaluated by flow test. While the hardened properties of (LWFC) include, compressive6 strength, tensile6 splitting6 strength, flexural6 strength, and 6modulus of 6elasticity. This6 study6 focuses6 on the effect of the adding of silica fume and steel fibre on the mechanical properties of  (LWFC). Silica fume was added as (5%) and (10%) by the weight of cement  and steel fiber (0.2%) and (0.4%) of the total volume of the mix. The density of lightweight foamed concrete was 1800±50kg/ , and cement to sand ratio was (1:1) with water cement ratio (0.28). The results indicated that adding of silica fume6 and steel6 fiber6 have great effect on the mechanical properties and improve them. The addition (10%) of silica fume and (0.4%) by volume of steel fiber was the best ratio that improves the mechanical properties of the lightweight foamed concrete (LWFC). The pozzolanic index of the (5%) and (10%) silica fume was (21.9%) and (74.76%), respectively.

Keywords

References

  1. ACI Committee 523.3R. (1993). Guide for Precast Cellular Concrete Floor, Roof, and Wall Units. American Concrete Institute.
  2. ACI Committee 116R, (2000). Cement and Concrete Terminology. American Concrete Institute.
  3. Amran Y.H., Farzadnia N., Ali A.A., (2015). Properties and applications of foamed concrete; a review. Construction and Building Materials, 101 990–1005.
  4. Abd, S. M., (2010). Potential of light weight foamed concrete as sustainable structure material by optimization and utilzation of waste materials. Doctoral dissertation. University Kebangsaan Malaysia.
  5. Awang, H. and Ahmad, M. H. (2012). “The effect of steel fiber inclusion on the mechanical properties and durability of lightweight foam concrete”, Elixir Adv. Egg. Info. Vol.48 , pp. 9348-9351.
  6. Mydin, M. A., Sahiduna, N. S., Yusof, M. Y., Noordina, N. M. (2015). “Compressive, Flexural and Splitting Tensile Strength of Lightweight Foamed Concrete with Inclusion of Steel Fibers”, Journal Technology, vol.75:5, pp.45–50.
  7. Hilal, A. A., Thom, N. H., & Dawson, A. R. (2015). The use of additives to enhance properties of pre-formed foamed concrete. International Journal of Engineering and Technology, 7(4), 286.
  8. Iraqi Specifications No. (5). (1984). Portland cement. Baghdad-Iraq. Iraqi Central Organization for Standardization and Quality Control.
  9. ASTM C778. (2013).Standard Specification for Standard Sand. Philadelphia, PA: American Society for Testing and Material.
  10. ASTM C494/C494M. (2015). “Standard Specification for Chemical Admixtures for Concrete”. American Society for Testing and Material International, Philadelphia, PA, USA.
  11. ASTM C1240. (2015). “Standard Specification for Silica Fume Used in Cementitious Mixtures”. American Society for Testing and Material International, Philadelphia, PA, USA.
  12. ASTM C796/C796M. (2012). “Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam”. American Society for Testing and Material International, Philadelphia, PA, USA.
  13. ASTM A820. (2011). “Standard Specification for Steel Fibers for Fiber-Reinforced Concrete” American Society for Testing and Material International, Philadelphia, PA, USA.
  14. ASTM C1437. (2013). “Standard Test Method for Flow of Hydraulic Cement Mortar” American Society for Testing and Material International, Philadelphia, PA, USA.
  15. British Standard Institute. Testing concrete Method for determination of compressive strength of concrete cubes. BS1811-116.
  16. ASTM C496. (2011). “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”. American Society for Testing and Material International, Philadelphia, PA, USA.
  17. ASTM C78. (2015). “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)”. American Society for Testing and Material International, Philadelphia, PA, USA.
  18. ASTM C469/C469M. (2014). “Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in compression” American Society for Testing and Material International, Philadelphia, PA, USA.
  19. ACI Committee 318, (2014). American Concrete Institute, and International Organization for Standardization. Building code requirements for structural concrete (ACI 318-14) and commentary. American Concrete Institute.
  20. ASTM C618 (2012) Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. American Society for Testing and Materials